1:You will have to reset the genuine ink cartridge when the printer shows
the ink level about 5-10 % full,after resetting, the ink level will show fully again.
2:This resetter only for genuine ink cartridge chip resetting,not for the other
brand ink cartridges or maintenance chip resetting.
For EPSON printer models: T6710 T6711 T6712
For ink cartridge models:
For T6710 (original and compatible chips):
WorkForce Pro WF-4630 All-in-One Printer
WorkForce Pro WF-4640 All-in-One Printer
WorkForce Pro WF-5620 Network Multifunction Color Printer
WorkForce Pro WF-5690 Network Multifunction Color Printer with PCL/Adobe PS
WorkForce Pro WP-4520 Network Multifunction Color Printer
WorkForce Pro WP-4530 All-in-One Printer
WorkForce Pro WP-4533 Network Multifunction Wireless Color Printer
WorkForce Pro WP-4540 All-in-One Printer
WorkForce Pro WP-4590 Network Multifunction Color Printer with PCL
WorkForce WF-3520 All-in-One Printer
WorkForce WF-3530 All-in-One Printer
WorkForce WF-3540 All-in-One Printer
WorkForce WF-3640 All-in-One Printer
WorkForce Pro WF-5110 Network Wireless Color Printer
WorkForce Pro WF-5190 Network Color Printer with PCL/Adobe PS
WorkForce Pro WP-4010 Network Color Printer
WorkForce Pro WP-4020 Inkjet Printer
WorkForce Pro WP-4023 Network Wireless Color Printer
WorkForce Pro WP-4090 Network Color Printer with PCL
For T6711(original chips)
Reset Procedure: Line up the contacts to match so you see the red LED is on.
Hold the resetter in contact with the chip until the red LED turns green.
1.Align the chip to the correct notch on the reset unit so that the chip contacts and the
pins on the resetter meet.
2.Keep the two units in firm contact. If the red light is blanking, it shows the two units contact well.
3.If the red light turns to green, it shows the reset operation is successful.
4.Cartridge is now ready for refilling with ink.
If the red LED does not turn green, retry this reset. If the LED stay red, the cartridge
chip is corrupted or damaged.